Messages regarding printheadsMessages regarding printheadsCannot adjust printhead. ................................................................................................................................ 652Wrong printhead. ............................................................................................................................................ 652Printhead error ............................................................................................................................................... 652Cannot recognize print head. .......................................................................................................................... 652Execute printhead cleaning. ............................................................................................................................ 653Cannot adjust printhead.Cannot adjust printhead.Cause Corrective ActionThe Printhead nozzles areclogged.Execute Head Posi. Adj. again, as follows.1. Press the OK button to clear the error.2. Print a test pattern to check the nozzles.(See "Checking for Nozzle Clogging.") ➔ P.5773. Clean the Printhead if the nozzles are clogged.(See "Cleaning the Printhead.") ➔ P.5784. Execute Head Posi. Adj. again.(See "Automatic Adjustment to Straighten Lines and Colors.") ➔ P.550The Printhead cannot bealigned; highly transparent filmis loaded.Press the OK button to clear the error.We recommend using a type of paper that you often use, other than film, for Printhead adjustment.(See "Automatic Adjustment to Straighten Lines and Colors.") ➔ P.550The Printhead is installedcrooked.Straighten the Printhead as follows, and then execute Head Posi. Adj. again.1. Press the OK button to clear the error.2. Use Head Inc. Adj. to adjust the angle of inclination of the Printhead.(See "Adjusting Line Misalignment.") ➔ P.5543. Execute Head Posi. Adj. again.(See "Automatic Adjustment to Straighten Lines and Colors.") ➔ P.550Wrong printhead.Wrong printhead.Cause Corrective ActionAn incompatible Printhead has been installed. Open the Top Cover and replace the Printhead with a new one.(See "Replacing the Printhead.") ➔ P.579Printhead errorPrinthead errorCause Corrective ActionThere is a problem with the Printhead. Open the Top Cover and replace the Printhead with a new one.(See "Replacing the Printhead.") ➔ P.579Cannot recognize print head.Cannot recognize print head.Cause Corrective ActionNo Printhead is installed. Follow these steps to install the Printhead.1. Open the Top Cover.2. Install the Printhead.(See "Replacing the Printhead.") ➔ P.579The Printhead cannot be recognized because it is not installed correctly. Follow these steps to reinstall the Printhead.1. Open the Top Cover.2. Reinstall the Printhead.(See "Replacing the Printhead.") ➔ P.579Cannot adjust printhead. iPF830User's GuideError Message Messages regarding printheads652
