Output StackerOutput StackerStationary Output Stacker .............................................................................................................................. 467Using the Stationary Output Stacker ............................................................................................................... 359Stowing the Stationary Output Stacker ........................................................................................................... 360Wheeled Output Stacker ................................................................................................................................ 362Using the Wheeled Output Stacker ............................................................................................................362Using the Stationary Output StackerUsing the Stationary Output StackerThe Stationary Output Stacker can be used in three positions, as shown.312231• When storing printed documents on the Output StackerUse position (1).• When the Output Stacker is not usedMove the stacker into position (2).• When the Media Take-up Unit is used, or when the Output Stacker is stored for long periodsLower it to position (3) for storage. (See "Stowing the Stationary Output Stacker.") ➔P.360When using the Output Stacker again after storage, reattach the Basket Rod on the front of the Output Stackerto the tips of the left and right basket arms and pull the side rods out completely.• When printing on large, stiff sheetsUse position (3).iPF830 Using the Stationary Output StackerUser's GuideHandling and Use of Paper Output Stacker359
