Canon imagePROGRAF iPF830 User Manual

Also see for imagePROGRAF iPF830: Setup guide Service guide

Contents

Canon imagePROGRAF iPF830 User Manual Manual pdf 285 page image

Note• You can also click the up or down arrow, or enter the number directly to increase or decrease the value.Adjusting MonochromeUse the monochrome setting to print monochrome images of color photographs captured with a scanner or digitalcamera or other color images.1 Select Monochrome on Color Mode in the Color Settings panel.2 Select Color Adjustment.3 Drag each slider to the left or right to adjust.Setting DetailsBrightness Adjusts the brightness of the entire image. When the results of the printout are brighterthan the original images such as the original photo before scanning and graphics cre-ated on the display, or when you want to print in different degrees of brightness, use thisfeature.Contrast Adjusts the relative brightness between the brightest and darkest portions of the image.*For soft gradation, decrease the contrast. For hard gradation, increase the contrast.Note• You can also click the up or down arrow, or enter the number directly to increase or decrease the value.MatchingMatchingYou can set the matching.Important• If No color correction is selected under Color Mode, the Matching is not displayed.iPF830 MatchingUser's GuideMac OS Software Preview285