11 Access the Page Setup pane.12 Select and click a roll paper in the A Paper Source list.13 Select the paper width of the roll loaded in the printer for B Roll Width. In this case, ISO A2/A3 (420.0mm)is selected.14 Confirm the print settings, and then click M Print to start printing.Note• For tips on confirming print settings, see "Confirming Print Settings ." ➔ P.258Using FavoritesUsing FavoritesYou can register print settings as Favorites to reuse settings from a particular job that met your expectations, orsettings for a particular page size that you will use repeatedly.• FavoritesRegistering a favorite for later use. You can choose the settings you have registered from a list before printing,and you can check the settings details.Note• You can also save the favorite settings as files. Using these files is a convenient way to print under the sameconditions on another computer. (In Windows.)For instructions on using favorites to print, refer to the following topics, as appropriate for your operating sys-tem.• Using Favorites (Windows) ➔P.150• Using Favorites (Mac OS) ➔P.259Cutting Roll Paper After PrintingCutting Roll Paper After PrintingRoll paper can be automatically cut after printing.Note• It may not be possible to cut certain types of paper, such as adhesive paper. For details on types of paper thatcannot be used with the auto cut feature, see the Paper Reference Guide. (See "Types of Paper.") ➔ P.320• Automatic CuttingRoll paper is cut automatically after printing. If you prefer, you can print continuously without cutting the roll, oryou can print a cut line.For instructions on cutting roll paper after printing, refer to the following topics, as appropriate for your operat-ing system.Using Favorites iPF830User's GuideEnhanced Printing Options Other useful settings140
