Important• This function is not available with Tracing Paper, Translucent Matte Film, or Clear Film.• If adjustment is not possible as expected using special media, try another type of paper, or try Manual adjust-ment.(See "Manual Adjustment to Straighten Lines and Colors.") ➔ P.552Note• Because the results of adjustment vary depending on the type of paper used for adjustment, use the same type ofpaper as you will use for printing.• If Standard does not improve printing, try adjusting the printhead manually.(See "Manual Adjustment to Straighten Lines and Colors.") ➔ P.552• If the printhead position was not adjusted during initial setup or when the printhead was replaced, execute Initialadjustmt.(See "Adjustment When Installing the Printhead.") ➔ P.553Items to PrepareWhen Using Rolls An unused roll at least 254.0 mm (10.00 in) wideWhen Using Sheets Standard : Two sheets of unused paper, A4/Letter size (or one sheet when using A3 or larger)Simple: One sheet of unused paper, A4/Letter sizePerform adjustment as follows.1 Load paper.• Attaching the Roll Holder to Rolls ➔P.330• Loading Rolls in the Printer ➔P.333• Loading Sheets in the Printer ➔P.353Important• Always make sure the loaded paper matches the type of paper specified on the printer. Adjustment can-not be completed correctly unless the loaded paper matches the settings.2 On the Tab Selection screen of the Control Panel, press ◀ or ▶ toselect the Settings/Adj. tab ( ).Note• If the Tab Selection screen is not displayed, press the Menu button.3 Press the OK button.The Set./Adj. Menu is displayed.4 Press ▲ or ▼ to select Adjust Printer, and then press the OK button.5 Press ▲ or ▼ to select Head Posi. Adj., and then press the OK button.6 Press ▲ or ▼ to select Standard or Simple, and then press the OK button.A test pattern is printed for adjustment.Adjustment is now finished if you have printed on a roll.7 If you are printing on cut sheets, a confirmation message is displayed on the Display Screen asking youwhether to continue printing.Press the OK button and follow the instructions on the Display Screen.iPF830 Automatic Adjustment to Straighten Lines and ColorsUser's GuideAdjustments for Better Print Quality Adjusting the Printhead551
