0KCY-0C1Installation/Settings ProblemsSee Common Problems also.Icons in the descriptionProblem with the wireless LAN connectionProblem with the wired LAN connectionProblem with the USB connectionThe machine cannot be connected to a computer via a wireless LAN, a wired LAN and a USB cable at the same time.All three connection types cannot be used at the same time. The following can be used at the same time: a USB cable and awired LAN, or a USB cable and a wireless LAN.Remote UI is not displayed.Are Disabling HTTP CommunicationDisabling Remote UIIf the machine is connected to a wired LAN, check that the cable is connected firmly and the IP address is set correctly, andthen start the Remote UI again.For how to check, see "Getting Started" Manuals Included with the Machine or Viewing Network Settings.If the machine is connected to a wireless LAN, check that the settings are specified correctly, and then start the Remote UIagain.For how to check, see "Getting Started" Manuals Included with the Machine or Connecting to a Wireless LAN(MF229dw / MF217w).A connection to a network cannot be established.The IP address may not be set correctly. Set the IP address again.Setting IP AddressesWhen you connect the machine to a computer via wireless LAN, check whether the machine is properly installed and ready toconnect to the network.When the machine cannot connect to the wireless LAN (MF229dw / MF217w)You are unsure of the set IP address.Viewing Network SettingsThe connection method cannot be switched between a wired LAN and a wireless LAN.Did you select a wired LAN or a wireless LAN on the operation panel on the machine as well? This selection is required to havethe machine switch to your selection.Selecting Wired LAN or Wireless LAN (MF229dw / MF217w)A fax cannot be sent or received on an optical fiber line.The machine is compliant with use on analog lines. When using an optical fiber line or IP phone line, the machine may not workcorrectly depending on the connection environment or connected devices. In such a case, contact the provider of the optical fiberline or IP phone.You are unsure of the SSID or the network key of the wireless router to be connected. The SSID is not displayed on thescreen.Check whether the SSID can be found on the wireless router or package box.Check the SSID or the network key of the wireless router by using Canon MF/LBP Wireless Setup Assistant.Checking the SSID and Network KeyThe SSID of the wireless router to be connected is not displayed in the access point list.Check whether the SSID is correct.Checking the SSID and Network KeyIf the SSID of the wireless router is hidden (using a stealth mode ), set the SSID to be visible on the wireless router.A mode that disables the SSID auto-detection of other devices.Check whether the machine is properly installed and ready to connect to the network.When the machine cannot connect to the wireless LAN (MF229dw / MF217w)**㻟㻤㻡㻌㻛㻌㻠㻣㻡Downloaded from ManualsPrinter.com Manuals
