|
0KCY-0ACCommon SettingsAll the settings about the operation of the paper drawer and the paper feed method are listed withshort descriptions. Default settings are marked with a dagger ( ).Specify this setting when you print a document on paper with logos. To print on paper with logos, you need to change how the paperloaded in the paper source is facing depending on whether you are performing 1- or 2-sided printing. However, if you change the settingto , you can just load the paper face down for both 1- and 2-sided printing. For more information, see LoadingPreprinted Paper.Multi-Purpose TraySpeed PriorityPrint Side PriorityDrawer 1Speed PriorityPrint Side PrioritySwitch Paper Feed Method Select the paper source Select Priority> or Paper SourcesSelect the paper source that you want to change the setting for.When using paper that has been preprinted with a logo, you need to change how it is facing when you perform 1-sided and 2-sided printing.We recommend selecting if you do not need to consider which side to print on.To print on a specific side of paper, you do not need to flip over paper in the paper source whether 1- or 2-sidedprinting is selected.If is set for a paper source that is loaded with paper you cannot use for 2-sided printing( Paper), is applied to the paper source instead. In this case, you need to load the paper inthe same way as when is selected ( Loading Preprinted Paper).1-sided printing speed may be slower when is selected.㻟㻠㻞㻌㻛㻌㻠㻣㻡Downloaded from ManualsPrinter.com Manuals
PreviousNext |