0KCY-07LSetting IPv4 AddressThe machine's IPv4 address can be either assigned automatically by a dynamic IP addressing protocol, such asDHCP, or entered manually. When connecting the machine to a wired LAN, make sure that the connectors ofthe LAN cable are firmly inserted into the ports (Connecting to a Wired LAN). You can test the networkconnection if necessary.Setting IPv4 AddressTesting the Network ConnectionTap Tap .If a screen for entering a PIN is displayed, enter the PIN with the numeric keys and tap .Setting the SystemManager PINSelect .Configure IP address settings.Select to automatically assign an IP address via a protocol such as DHCP. When is displayed, automaticaddressing is enabled.Select to configure the IP address settings by manually entering an IP address. In order to select this option, must be set to .Select when you want to view the current IP address settings.Automatically assigning an IP address1Select 2Tap , , or .If you do not want to use DHCP/BOOTP/RARP to assign an IP addressSelect . If you select , , or when these services are unavailable, the machine will wastetime and communications resources searching the network for these services.3Check that is set to .If is selected, change the setting to .Setting IPv4 Address1234㻞㻡㻢㻌㻛㻌㻠㻣㻡Downloaded from ManualsPrinter.com Manuals
