|
0KCY-08USetting the System Manager PINSet a System Manager PIN that is intended exclusively for Administrators. You can access , Settings>, etc. only when the PIN has been entered correctly. It is recommended that only Administrators know the PIN.Tap Tap .Select .Specify the System Manager PIN.Enter a number of up to seven digits using the numeric keys, and tap .When is displayed, enter the PIN once again to confirm.You cannot set a PIN that consists only of zeros, such as "00" or "0000000".To disable the PIN, press to erase the PIN (leave the text box blank), and tap .Setting the System Manager NameConfiguring settings via the Remote UIStart the Remote UI and log on in System Manager Mode. Click [Settings/Registration] [System Management] [Edit...] andspecify the necessary settings on the displayed screen.By using the Remote UI, you can register a variety of information, including contact information, Administrator comments, theinstallation location of the machine, as well as to the settings that you can register by using the operation panel. Theregistered information can be viewed on the [Device Information] page of the Remote UI. Checking System ManagerInformationIf a System Manager PIN is SetIf you try to access , , etc., thefollowing screen is displayed. Enter the set PIN.Entering a PIN is also required when logging on in System Manager Mode in the Remote UI.Starting Remote UI1 Tap .2 Enter up to 32 characters for the System Manager Name, and tap . Entering Text1234㻞㻤㻢㻌㻛㻌㻠㻣㻡Downloaded from ManualsPrinter.com Manuals
|
