[IPv6 Address: Inbound Filter]Select to restrict receiving data from the machine to a computer by specifying IPv6 addresses.Specify the settings for packet filtering.[Blocked Addresses]Register addresses to be blocked, as well as check or delete registered blocked addresses.[Allowed Addresses]Register addresses to be allowed, as well as check or delete registered allowed addresses.1 Select the [Use Filter] check box.Select the check box to restrict communication. Clear the check box to disable the restriction.2 Specify the address.Enter the IP address (or the range of IP addresses) in the [Address to Register] text box and click [Add].Registered address Result[BlockedAddresses]Restricts communication (received) with devices having their IP addresses entered for [Address toRegister]. Communication is allowed with devices with any other IP addresses.[AllowedAddresses]Allows communication (received) only with devices having their IP addresses entered for [Addressto Register], and restricts communication with devices with any other IP addresses.Registered asbothAllows communication (received) only with devices having their IP addresses registered in[Allowed Addresses], and restricts communication with devices with any other IP addresses.However, communication is restricted for IP addresses also registered in [Blocked Addresses].Check for entry errorsIf IP addresses are incorrectly entered, you may be unable to access the machine from the Remote UI, in which case youneed to set or to . IPv4 Address Filter IPv6 Address FilterEntry form for IP addressesDescription ExampleEntering asingle addressIPv4:Delimit numbers with periods. 192.168.0.10IPv6:Delimit alphanumeric characters with colons. fe80::10Specifying arange of Insert a hyphen between the addresses.IPv4:192.168.0.10-192.168.0.205㻞㻥㻜㻌㻛㻌㻠㻣㻡Downloaded from ManualsPrinter.com Manuals
