Changing the port type or numberIf the printing protocols ( Configuring Printing Protocols and WSD Functions) or port numbers ( Changing Port Numbers)have been changed on the machine, the corresponding settings on the computer must also be configured. This change is onlyavailable for LPR or RAW ports.Click [Close].3 Click [Auto Detect], select the machine when it is detected, and click [Next].If the machine is not detectedClick [Refresh]. If the problem persists, click [IP address] or [MAC address], enter the IP address or MAC addressof the machine Viewing Network Settings, and then click [Next].4 Click [Add] [Finish].5 Click [Close].1 Click [Configure Port].2 Click the [LPR] or [RAW] radio button in [Protocol Type], change the number in the [Port Number] textbox as necessary, and then click [OK].4㻞㻢㻤㻌㻛㻌㻠㻣㻡Downloaded from ManualsPrinter.com Manuals
