Printed colors of lines are inaccurate during HP-GL/2 printingPrinted colors of lines are inaccurate during HP-GL/2 printingCause Corrective ActionAdjustFaintLines is On in the Con-trol Panel menu.Setting AdjustFaintLines to Off in the Control Panel menu may help produce the expectedresults. However, lines in some colors may appear broken.HP-GL/2 jobs are printed 6 mm larger than specifiedHP-GL/2 jobs are printed 6 mm larger than specifiedCause Corrective ActionThe page size of the HP-GL/2 print job, as created in the source application, isincorrect.In the Control Panel menu, set Oversize to Off.(See "Menu Settings.") âž” P.449HP-GL/2 jobs are printed at maximum size, even if a standard size is specifiedHP-GL/2 jobs are printed at maximum size, even if a standard size is specifiedCause Corrective ActionThe page size of the HP-GL/2 print job, as created in thesource application, is incorrect.Set Detect img size to Command priority or Detected size in theControl Panel menu.(See "Menu Settings.") âž” P.449Set Conserve Paper to On in the Control Panel menu.(See "Menu Settings.") âž” P.449HP-GL/2 printing takes a long timeHP-GL/2 printing takes a long timeCause Corrective ActionLarge print jobs with a lot of data take longer to print. Please wait a while until printing is finished.A job was printed when Input Resolution in the ControlPanel menu was set to 600dpi.In the Control Panel menu, set Input Resolution to 300dpi and printagain.(See "Menu Settings.") âž” P.449The printer stops when printing a HP-GL/2 job (the carriage stops moving)The printer stops when printing a HP-GL/2 job (the carriage stops moving)Cause Corrective ActionThe printer is analyzing the print job. Please wait a while until printing is finished.A job was printed when Input Resolution in the ControlPanel menu was set to 600dpi.In the Control Panel menu, set Input Resolution to 300dpi and printagain.(See "Menu Settings.") âž” P.449iPF850 Printed colors of lines are inaccurate during HP-GL/2 printingUser's GuideTroubleshooting HP-GL/2 problems645
