Important• The Stacker Canopy may become difficult to open depending on how it is stored. If this happens, havetwo people hold the handles on the left and right side of the Canopy and open the left and right sidessimultaneously while ensuring that the Canopy does not bend.• When removing printed documents, remove them all at once so that there is no printed document left inthe Stacker. Once removed, do not return the printed documents back into the Stacker. If there are anyprinted documents misaligned from the ejected position, the next ejection may not be performed proper-ly.• Remove printed documents after opening the Canopy. If you attempt to remove them while closed, theprinted documents may become scratched.Ejecting to the Output StackerEjecting to the Output Stacker1 Remove the Stacker from the printer. (See "Installing and Removing the Stacker On the Printer.") ➔P.3762 Go between the Stacker and the printer and open the OutputStacker.3 Grasp the Stacker outer frame (a) and push theStacker straight until the Ejection Support (b) touchesthe end of the Output Stacker.abiPF850 Ejecting to the Output StackerUser's GuideHandling and Use of Paper Stacker381
