• If you switch to printing in a TCP/IP network, or if the printer's IP address is changed, see "Configuring theDestination in TCP/IP Networks ." ➔P.493• If you switch to printing in a Bonjour network, see "Configuring the Destination for Bonjour Network ." ➔P.493Configuring the Printer's TCP/IP Network Settings With RemoteUIConfiguring the Printer's TCP/IP Network Settings With RemoteUIFollow the steps below to configure the TCP/IP network settings.When using an IPv4 IP address1 Start the web browser and enter the following URL in the Location (or Address ) box to display the Remo-teUI page.http://printer IP address or name/Example: http://xxx.xxx.xxx.xxx/2 Select Administrator Mode and click Logon.Note• If a password has been set on the printer, enter the password.3 Click Network in the Device Manager menu at left to display the Network page.4 Click Edit in the upper-right corner of the TCP/IPv4 group to display the Edit TCP/IP Protocol Settingspage.5 Refer to the TCP/IP Settings Items table to complete the settings.TCP/IP Settings ItemsItem Details Default SettingUse DHCP Activate this setting to use DHCP for configuring the IP address. OffUse BOOTP Activate this setting to use BOOTP for configuring the IP address. OffUse RARP Activate this setting to use RARP for configuring the IP address. OffEnable DNS DynamicUpdateActivate this setting to perform DNS server registration automatically. OffUse Zeroconf Func-tionActivate this setting to use Bonjour. OnIP Address Specify the printer's IP address. 0.0.0.0Subnet Mask Specify the printer's subnet mask. 0.0.0.0Gateway Address Specify the printer's default gateway. 0.0.0.0LPD Printing Activate this setting to use LDP Printing. OnIPP Printing Activate this setting to use IPP Printing. OnIPP Printer URI Specify the URI of the printer used for IPP printing using up to 252 charac-ters.printerRAW Printing Activate this setting to use Raw Printing. OnRAW Mode Bi-direc-tionActivate this setting to use Raw mode bidirectional communication. OffFTP Printing Activate this setting to use FTP Printing. OnUse Discovery Activate this setting to use SLP Discovery function. OnScope Enter the SLP search range. defaultSMTP Server Ad-dressSpecify the SMTP server's IP address.You can also specify the SMTP server domain name, if desired.0.0.0.0Primary DNS ServerAddressSpecify the IP address of the primary DNS server. 0.0.0.0Secondary DNSServer AddressSpecify the IP address of the secondary DNS server. 0.0.0.0Configuring the Printer's TCP/IP Network Settings With RemoteUI iPF850User's GuideNetwork Setting Initial Settings490
