Changing the Type of PaperNote• When you load a roll, a menu for selection of the type of paper is shown on the Display Screen. Select the type ofpaper, and then press the OK button.If no barcode has been printed on the roll and you have set ManageRemainRoll to On, specify the roll length afterthe type of paper. (See "Specifying the Paper Length.") ➔ P.3521 On the Tab Selection screen of the Control Panel, press ◀ or ▶ toselect the Paper tab ( ).Note• If the Tab Selection screen is not displayed, press the Menu button.2 Press the OK button.The Paper Menu is displayed.3 Press ▲ or ▼ to select Chg. Paper Type, and then press the OK button.4 Press the ▲ button or the ▼ button to select the media type (Roll 1 (Upper), Roll 2 (Lower), or CutSheet), and then press the OK button.5 Press ▲ or ▼ to select the type of paper loaded in the printer, and then press the OK button.Important• Be sure to select the correct paper type. If this setting does not match the loaded paper, it may causefeed errors and affect printing quality.Note• For details on types of paper, see the Paper Reference Guide. (See "Types of Paper.") ➔ P.332 By de-fault, Plain Paper is selected.• If you move the Release Lever, the setting automatically reverts to the previously selected paper.Using the Same Type of Paper RegularlyConfigure this setting so that current media type settings will be automatically selected when you load the sametype of paper later.1 On the Tab Selection screen of the Control Panel, press ◀ or ▶ toselect the Paper tab ( ).Note• If the Tab Selection screen is not displayed, press the Menu button.2 Press the OK button.The Paper Menu is displayed.3 Press ▲ or ▼ to select Keep Paper Type, and then press the OK button.4 Press ▲ or ▼ to select On, and then press the OK button.ReadyPlain PaperOK: Paper Menu Plain PaperReadyPlain PaperOK: Paper Menu Plain PaperiPF850 Changing the Type of PaperUser's GuideHandling and Use of Paper Handling rolls351
