Advanced Guide > Scanning > Scanning with Other Application Software > ScanGear (Scanner Driver) Screens >Output SettingsOutput SettingsOutput Settings allows you to set the following items:Output ResolutionSelect the resolution to scan at.The higher the resolution (value), the more detail in your image.Select a resolution from the options displayed by clicking the button, or enter a value within the rangeof 25 dpi to 19200 dpi (in 1 dpi increments).NoteSee " Resolution " for details.Output SizeSelect an output size.Select Flexible to set custom sizes or select a size for printing or displaying. Select Add/Delete... to setcustom size and save it as a new output size option.FlexibleYou can specify the output resolution and scale, and adjust the cropping frame. When no croppingframe is displayed, the entire Preview area will be scanned. When a cropping frame is displayed,the portion within the cropping frame will be scanned.To enlarge/reduce the scanned image, enter values into (Width) and (Height) in OutputSettings or specify a value (by 1%) for %. The maximum value available for % depends on theOutput Resolution. % can be specified for up to 19200 dpi (the maximum available outputresolution).Paper Size (L, etc.) & Monitor Size (1024 x 768 pixels, etc.)Width, height and scale cannot be specified. The preview image will be cropped according to theselected output size and resolution. The portion within the cropping frame will be scanned at thesize of the selected paper/monitor size. You can drag the cropping frame to enlarge, reduce ormove it while maintaining the aspect ratio.Add/Delete...Open the Add/Delete the Output Size dialog box, in which you can save/delete custom outputsizes.Page 552 of 815 pagesOutput Settings
