Advanced Guide TroubleshootingContents > Other Usages > Machine SettingsMachine SettingsThis section describes the items you can set or change in Device settings of the Settings menu. Fordetails on setting or changing, refer to the on-screen manual: Advanced Guide .Plain paper feed settingsSelects the paper source (Rear Tray or Cassette) in which you load plain paper. The machine feedsplain paper from the Cassette by default. Use this setting to change the paper source for plainpaper to the Rear Tray.Print settingsPrevent paper abrasionUse this setting only if the print surface becomes smudged.Extended copy amountSelects the amount of image that extends off the paper when making borderless copies.LAN settingsChange wireless/wiredSwitches between wireless LAN and wired LAN networks.Wireless LAN settingsConfigures the wireless LAN connection with WPS (Wi-Fi Protected Setup) or WCN (WindowsConnect Now). WCN setting is only available for Windows Vista.For details, refer to the printed manual: Getting Started.Wireless LAN setting listDisplays the wireless LAN network configurations of the machine on the LCD.Wired LAN setting listDisplays the wired LAN network configurations of the machine on the LCD.IPv4/IPv6 settingConfigures the IP version (IPv4 or IPv6). We recommend to select IPv4 for general use.WSD settingSwitches the WSD (a network protocol supported by Windows Vista) configuration (Active orInactive).Reset LAN settingsSets the network configurations on the machine back to the default.Advanced settingsDate displaySelects the format of date that is printed or displayed on the screen.Read/write attributeSelects whether to use the Card Slot of the machine as the memory card drive of a computer.Page 60 of 815 pagesMachine Settings
