Advanced Guide > Scanning > Scanning with Other Application Software > Scanning with Advanced Settings UsingScanGear (Scanner Driver) > Starting ScanGear (Scanner Driver)Starting ScanGear (Scanner Driver)Use ScanGear (scanner driver) to make image corrections and color adjustments when scanningdocuments. ScanGear (scanner driver) can be started from MP Navigator EX or an application.Follow these steps to start ScanGear (scanner driver).ImportantTo scan via a network connection, set up the network environment before scanning.Network Scan SettingsStarting from MP Navigator EXNavigation Mode ScreenFollow these steps to start ScanGear (scanner driver) from the Navigation Mode screen of MP NavigatorEX.1. Start MP Navigator EX and open the Navigation Mode screen.Starting MP Navigator EX2. Point to Scan/Import and click Photos/Documents (Platen).The Scan/Import window opens.3. Select the Use the scanner driver checkbox, then click Open Scanner Driver.The ScanGear (scanner driver) screen appears.One-click Mode ScreenFollow these steps to start ScanGear (scanner driver) from the One-click Mode screen of MP NavigatorEX.1. Start MP Navigator EX and open the One-click Mode screen.Starting MP Navigator EX2. Click the corresponding icon.Page 514 of 815 pagesStarting ScanGear (Scanner Driver)
