Advanced Guide > About Bluetooth Communication > Printing Data via Bluetooth Communication > Setting the PrinterSetting the PrinterThis section describes the procedures for checking the settings of the Bluetooth unit on the LCD of theprinter in preparation for Bluetooth printing.The screens may differ depending on the printer you are using.If you need more information about the Bluetooth settings, see Setting Bluetooth Printing .1. Make sure that the Bluetooth unit is attached and the printer is turned on.For information about how to attach the Bluetooth unit, see Attaching to and Removing from thePrinter .2. Display the Bluetooth settings screen on the LCD.For information about how to display the Bluetooth settings screen, refer to Changing the MachineSettings on the LCD .NoteIf the Bluetooth settings screen is not displayed on the LCD, the Bluetooth unit may not beattached correctly. Remove the Bluetooth unit from the printer and attach it once again.For details, see Attaching to and Removing from the Printer .If the Bluetooth settings screen still is not displayed, the Bluetooth unit may be faulty. In thiscase, contact your Canon service representative.3. Select Device name.The Device name screen is displayed.4. Check the device name.The device name is necessary to register the printer as a Bluetooth device. Be sure to note thedevice name.NoteIf multiple printer units with the same model name are connected to the system, assigning adifferent device name to each printer is recommended for easy identification of the printer youwill use. See Bluetooth Settings Screen .After checking the device name, press the OK button on the printer.Page 622 of 815 pagesSetting the Printer
