Advanced Guide > Scanning > Scanning Images > Appendix: Various Scan Settings > Network Scan SettingsNetwork Scan SettingsYou can connect the machine to a network to share it among multiple computers or scan images into aspecified computer.ImportantComplete the network settings of the machine beforehand. (Refer to the printed manual: GettingStarted.)Multiple users cannot scan at the same time.Complete the following settings to enable scanning over a network.Setting for Scanning with MP Navigator EXTo scan over a network using MP Navigator EX, follow the steps below and change the connection statusbetween the computer and the machine.1. Start MP Navigator EXStarting MP Navigator EX2. Click Preferences.3. For network connection, select (model name) series (Network: XXXXXXXXXXXX) forProduct Name.(Where XXXXXXXXXXXX is the MAC address.)ImportantFor USB connection, select (model name) series for Product Name.4. Click OK.The Preferences dialog box closes. You can now scan via a network connection.Go to the Main Menu to check whether network scanning is enabled.Page 372 of 815 pagesNetwork Scan Settings
