(2) Select Next, and press the OK button.4. Start scanning.(1) Confirm the message, press the OK button, then load an original on the PlatenGlass.See Loading Originals to Copy or Scan .NoteThe sizes of originals that can be scanned are A4, 8.5"x11" (LTR), 4"x6" (10x15cm), and5"x7" (13x18cm).(2) Press the Color button for color scanning, or the Black button for black & whitescanning.The machine starts scanning.(3) Check the preview of the scanned data on the screen.NoteThe preview screen will not appear if Preview OFF is selected in Advanced in theprocedure of (1) in step 3.To rescan the original, press the left Function button to select Rescan. Confirm themessage and scan the original again.To rotate the scanned data 90 degrees clockwise, press the right Function button toselect Rotate.(4) Press the OK button to save the scanned data.The message "End scanning?" appears when scanning is completed.(5) Select End, and press the OK button.Remove the original on the Platen Glass after scanning is completed.NoteTo scan the multi-page document into one file, select Continue, and press the OK button.Then load the next page on the Platen Glass, and repeat the procedures from (2) in thisstep.Repeat the same procedure until you finish scanning all the pages.ImportantDo not remove the USB flash drive or turn off the power while the machine is operating.Do not open the Document Cover or move the loaded original until scanning is completed.The scanned data will be saved in the folder "CANON_SC" on the USB flash drive. You cannotprint the saved data using the Operation Panel on the machine.Insert the USB flash drive into a computer to view or print the saved data from the computer.NoteTo remove the USB flash drive after scanning is completed, see Removing the USB Flash Drive.You can exit the Scan menu and select another menu, if you press the HOME button afterscanning is completed.Deleting the Scanned DataPage 37 of 815 pagesSaving Scanned Data
