In the Add/Delete the Output Size dialog box, you can specify multiple output sizes and save themat one time. Saved items appear in the Output Size list along with the predefined items.AddTo add a size, select Print or Image display for Destination, then enter Output Size Name, Width,and Height then click Add. The name of the added size appears in Output Size List.Click Save to save all the added items. Click Cancel to cancel all items that were added after youopened the Add/Delete the Output Size dialog box.DeleteTo delete an item, select it in Output Size List and click Delete. The deleted items will disappearfrom Output Size List.When you click Save, the items that disappeared from Output Size List will be deleted. When youclick Cancel, they will not be deleted.ImportantYou cannot delete predefined output sizes such as A4 and 1024 x 768 pixels.NoteSave up to 10 output sizes to Output Size List for each destination.An error message appears when you enter a value outside the setting range. Enter a valuewithin the range displayed in the message.Unit varies by Destination. For Print, select mm or inches. For Image display, the unit ispixels.NoteSee " Adjusting Cropping Frames " for details on cropping frames.Whether or how the cropping frame is initially displayed on a preview image can be specified onthe Preview tab of the Preferences dialog box. See Cropping Frame on Previewed Images in "Preview Tab ."(Switch Aspect Ratio)Rotate the cropping frame 90 degrees. Click again to return it to the original orientation.Data SizeAn image file is created when the preview image is scanned. Its size when saved in BMP format isdisplayed.NoteWhen the file size is 100 MB or more, the value appears in red. In that case, a warning messageappears when you click Scan. It is recommended that you change each settings to set Data Size99 MB or less, and than scan.Page topPage 553 of 815 pagesOutput Settings
