196 DRIVING AND OPERATINGCar Wash Mode (Engine Off – Driverout of Vehicle)Car Wash Mode (Engine Off – Driverout of Vehicle) is not available forvehicles with the 4.2L engine.To place the vehicle in N (Neutral)with the engine off and the vehicleunoccupied:1. Drive to the entrance of thecar wash.2. Apply the brake pedal.3. Open the door.4. Shift to N (Neutral).5. Turn off the engine and releasethe brake pedal.6. The indicator should continue toshow N. If it does not, repeatSteps 2–5.7. Exit the vehicle and close thedoor. The vehicle is now readyfor the car wash.8. The vehicle may automaticallyshift to P (Park) upon re-entry.Car Wash Mode (Engine On – Driverin Vehicle)To place the vehicle in N (Neutral)with the engine on and the vehicleoccupied:1. Drive to the entrance of thecar wash.2. Apply the brake pedal.3. Shift to N (Neutral).4. Release the brake pedal. Thevehicle is now ready for thecar wash.Car Wash Mode (Engine On – Driverout of Vehicle)To place the vehicle in N (Neutral)with the engine on and the vehicleunoccupied:1. Drive to the entrance of thecar wash.2. Apply the brake pedal.3. Open the door.4. Shift to N (Neutral), then releasethe brake pedal.5. The indicator should continue toshow N. If it does not, repeatSteps 2–4.6. Exit the vehicle and close thedoor. The vehicle is now readyfor the car wash.7. The vehicle may automaticallyshift to P (Park) upon re-entry.CautionA transmission hot message maydisplay if the automatictransmission fluid is too hot.Driving under this condition candamage the vehicle. Stop and idlethe engine to cool the automatictransmission fluid. This messageclears when the transmission fluidhas cooled sufficiently.D : This position is for normal driving.If more power is needed for passing,press the accelerator pedal down.A clicking noise or a detent may befelt when pressing the acceleratorpedal all the way to the end of travel.This is normal.
