272Chapter 6: Management with the CLU6. Press Ctrl-A to save your settings.To start, stop or restart the SNMP service, highlight Start, Stop, or Restart andpress Enter.Managing SNMP Trap SinksCreating a SNMP trap sinkTo create a trap sink:1. From the Main Menu, highlight Additional Info and Management and pressEnter.2. Highlight Software Management and press Enter.3. Highlight SNMP and press Enter.4. Highlight Trap Sinks and press Enter.A list of the current trap sinks appears.Adding a trap sinkTo add a trap sink:1. From the Main Menu, highlight Additional Info and Management and pressEnter.2. Highlight Software Management and press Enter.3. Highlight Create New Trap Sink and press Enter4. Highlight Trap Sink IP address and press the backspace key to erase thecurrent value, then type the new IP address in this field.5. Highlight Trap Filter and press the spacebar to toggle through the severitylevels.The Severity Levels are (lowest to highest) Information, Warning, Minor,Major, Critical and Fatal.6. Press Ctrl-A to save the Trap Sink.Deleting a trap sinkTo delete a trap sink:1. From the Main Menu, highlight Additional Info and Management and pressEnter.2. Highlight Software Management and press Enter.3. Highlight the trap sink you want to delete and press the spacebar to mark it.The mark is an asterisk (*) to the left of the listing.4. Highlight Delete Marked Entries and press Enter.
