85Chapter 4: Management with ASUS Storage Management• Fabric WWNN – World Wide Node Name (appears when connected toa switch)• Fabric WWPN – World Wide Port Name (appears when connected to aswitch)• Current Speed – 8 Gb/s, 4 Gb/s, or 2 Gb/s• Link Type – Long-wave laser, short-wave laser or electrical• Link Speed* – 8 Gb/s, 4 Gb/s, 2 Gb/s, or Auto• Topology* – NL-Port, N-Port, or Auto• Hard ALPA* – Address can be 0 to 254. 255 means this feature isdisabled• Alias WWPN* Denotes items that you can change under Port Settings, below.Making Fibre Channel Port SettingsTo make Fibre Channel port settings:1. Click the Subsystem icon in Tree View.2. Click the Administrative Tools icon.3. Click the Fibre Channel Management icon.4. Click the Port tab in Management View5. Click the Port1 or Port2 link in Management View.6. Make the settings appropriate to your system. See ―Port Setting Information‖on page 85.• Configured Link Speed – 8 Gb/s, 4 Gb/s, 2 Gb/s or Auto (self-setting)• Configured Topology – N-Port (Point-to-Point), NL Port (ArbitratedLoop) or Auto (self-setting)• Hard ALPA – Address can be 0 to 254. 255 means this feature isdisabled. An ALPA identifies a port in an arbitrated loop.7. Click the Submit button to save your settings.Port Setting InformationThe table below shows the type of attached topology you will achieve based onyour connection type and the configured topology you select.
