119Chapter 4: Management with ASUS Storage ManagementStarting or Restarting Telnet serviceTo start or restart the Telnet service, click the Start or Restart button.Making SNMP SettingsASUS Storage’s SNMP service enables the SNMP browser to obtain informationfrom the ASUS Storage. The Trap Sink is where SNMP events are sent and canbe viewed.To change the SNMP settings:1. Click the Subsystem icon in Tree View.2. Click the Administrative Tools icon.3. Click the SNMP Management link in Management View.4. Enter the SNMP Port number.161 is the default.5. Enter a System Name.There is no default name.6. Enter a System Location.USA is the default.7. Enter a System Contact (the email address of the administrator or otherindividual).8. Enter the Read Community.Public is the default.9. Enter the Write Community.Private is the default.To add a Trap Sink, see ―Adding Trap Sinks‖ below.10. Click OK in the confirmation box to restart the SNMP service with yourchanges.Adding Trap SinksTo add a trap sink:1. Enter a Trap Sink IP address.2. Select a Trap Filter, choose the lowest level of Severity to be reported foreach event.See ―Setting-up User Event Subscriptions‖ on page 77 for an explanation ofthe Severity levels.3. Click the Update button.The new trap sink appears in the Trap Sinks list.
