4.2 Description of Menu Items 91Paper SizeSpecifies the paper size to be loaded in trays.Note• For details on the paper sizes available for each tray, refer to “Usable Paper” (P. 55).• You cannot configure settings for tray 1 if the bypass tray (optional) is installed.Tray 1 to Tray 4[Auto] (default)Select this to load the standard size paper.[Custom]Select this to load the custom size paper and specify the [Portrait (Y) Size] and [Landscape(X) Size] in increments of 1 mm (0.1").Paper NameYou can change [Custom 1] to [Custom 5] displayed in [Paper Priority] and [Paper Type] toany names.Custom 1 to Custom 5 * No.1 to 3 characters of 4 are available (refer to P. 95)Specify up to 12 alphanumeric characters.Job OffsetSpecify how to perform offset output. This setting is only available when the offset catch tray(optional) is installed.[Offset Per Set] (default)When printing multiple copies, each set of document is output with its position shifted perset.[Offset Per Job]Select this to output the document with its position shifted per job.[Off]Select this if you do not want to perform offset output.Print IDSelect this to print the user ID on a specified position.The default is [Off].Odd Page 2 SidedSpecifies whether to perform 1 sided printing or 2 sided printing for the first page when thetotal number of pages is an odd number. This setting is only available when the duplex unit(optional) is available. The default is [1 Sided].PaperSelect ModeSpecifies how to select paper when printing PostScript data.[Auto] (default)Select this mode when you want to use our PostScript driver. Selecting this will print on thepaper loaded in the tray specified by the printer driver.[Select from tray]Some applications create the PostScript program directly without using a printer driver. Inthis case, a paper tray may not be selected correctly depending on the application.Selecting [Select from tray] ensures that data is printed on the specified paper.
