34 2 PrintingAt the Control PanelThis section explains the procedure to print data stored in the printer by Secure Print.Note• You can also delete, without printing, secure print data stored in the printer. For details, refer to “Init/DelData” (P. 94).1. Press the < > button.2. Check that [Secure Print] is displayed and then press the < > button.3. Press the < > or < > button until the required user is selected and then press the< > button.4. Move the cursor by the < > button and then enter the password (within 12 digits) bythe < > and < > buttons.5. Press the button.6. Press the < > or < > button until the required document is selected and then pressthe < > button.7. After printing, press the < > or < > button to delete or save the document and thenpress the < > button.8. Press the button. Printing will start.9. Press the Note• The displayed user ID (up to eight characters) is the [User ID] specified in the [Secure Print] dialog boxof the [Basic] tab of the printer driver.• For the password, enter the [Password] set in the [Secure Print] dialog box of the [Basic] tab of theprinter driver. If [Password] is not configured, there will be no setting on the control panel.• The document name displayed (up to 12 characters) is the [Document Name] specified in the [SecurePrint] dialog box of the [Basic] tab of the printer driver.
