Xerox DocuPrint 305 User Manual

Also see for DocuPrint 205: Operation guide Settings guide

Contents

Xerox DocuPrint 305 User Manual Manual pdf 85 page image

4.2 Description of Menu Items 85TCP/IP SettingsGet IP AddressSpecifies whether to automatically or manually retrieve the necessary information for usingTCP/IP (IP address, subnet mask, and gateway address) from the DHCP (Dynamic HostConfiguration Protocol) server with AutoIP feature, DHCP server, BOOTP, or RARP. Forthe addresses you need to set manually, contact your network administrator. The default is[DHCP/Autonet].Note• Changing the setting from [DHCP/Autonet], [DHCP], [BOOTP], or [RARP] to [Manual] may display the IPaddress setting screen. If it appears, specify the IP address manually.IP Address, Subnet Mask, Gateway Address *3 (refer to P. 95)These items are used to check the addresses that have been obtained automatically or tospecify addresses manually. Enter the address in the format of xxx.xxx.xxx.xxx. You canspecifies values in the range of 0 to 255 for xxx.Important• Incorrect IP address may affect the overall network.• If you enter an incorrect address when setting the subnet mask (e.g. when “0” is set for the bit in themiddle), the address returns to the previous values even if you press the button after settingvalues. You cannot move to other menu items until you have set the correct values.• Set the address only when you have to explicitly specify the gateway address. You do not need to setthe address if the gateway address can be set automatically.InternetServicesSpecifies whether to use Internet Services.When [Enable] is specified, you can use CentreWare Internet Services to display the printerand job status on a web browser and change the printer settings. The default is [Enable].Note• To enable Internet Services, you need to specify both the IP addresses of a computer and the printer.WINS ServerGet DHCP AddressSpecifies whether to automatically retrieve the IP address of WINS server that is requiredfor using WINS (Windows Internet Name Service). If you do not select automatic retrievalof the IP address, contact your network administrator for manual specification of theaddresses. The default is [On].Note• Changing from [On] to [Off] may display the IP address setting screen. If it appears, specify the IPaddress manually.Primary IP, Secondary IP*3 (refer to P. 95)These items are used to check the addresses that have been automatically obtained or tospecify the addresses manually. Enter the address in the format of xxx.xxx.xxx.xxx. You canset values between 0 and 255 for xxx. If the primary IP address is invalid, the secondary IPaddress will become invalid too.Important• Incorrect IP address may affect the overall network.