64 3 About Paper3.4 Setting Paper TypesPrior settings on the control panel are required for the types of paper loaded in trays 1 to 4.For accurate image quality processing, refer to the following table and set the paper typeson the control panel.Important• Paper type settings must match those of the actual paper loaded in the trays. Otherwise, image qualitycannot be processed accurately. Toner may not fuse properly on the paper, resulting in dirty and poorquality printouts.• Changes in paper type settings on the printer driver are not reflected in this printer.Refer to• Paper and paper types that can be loaded: “Usable Paper” (P. 55)Setting on the Control Panel1. Press the 2. Press the < > or < > button until [Admin Menu] is displayed, then press the < >button.3. Press the < > or < > button until [Printer Settings] is displayed, then press the < >button.4. Press the < > or < > button until [Paper Type] is displayed, then press the < >button.5. Press the < > or < > button until the required tray is displayed, then press the < >button.6. Press the < > or < > button until the correct paper type is displayed for the loadedpaper, then press the button.7. Press the Paper name Weight Paper type set in trayFX P 60 - 90 g/m 2 Plain (default)FX EPR, FX R 60 - 90 g/m 2 RecycledLabel, envelope,Japanese official postcard 90 - 156 g/m 2 Heavyweight 1157 - 216 g/m 2 Heavyweight 2JE001 - Transparency
