90 4 Settings on the Control Panel[Bypass Feed]Select this to print on paper loaded in the bypass tray. You can select this only when thebypass tray (optional) is installed.Note• If a computer issues the instruction about paper selection, it overwrites this setting.Paper TypeSpecifies the paper type to be loaded in trays. The default is [Plain] for all trays. The namesspecified in [Paper Name] will be displayed for Customs 1 to 5.Tray 1 to Tray 4Select from [Plain], [Recycled], [Heavyweight 1], [Heavyweight 2], [Transparency], and[Custom 1] to [Custom 5].Tray 1 (Bypass)Select from [Plain], [Recycled], [Heavyweight 1], [Transparency], and [Custom 1] to[Custom 5].Note• [Tray 1 (Bypass)] will be displayed when the bypass tray (optional) has been installed. If it is displayed,you cannot specify [Tray 1].Paper PrioritySpecifies the priority of the paper type loaded in the tray specified with the auto trayselection feature. The names specified in [Paper Name] will be displayed for Customs 1 to5.Plain, Recycled, Heavyweight 1, Heavyweight 2, Custom 1 to Custom 5Select the priority of each paper type from [Not Selected] and [1] to [9]. You can specify thesame priority for different paper types. In this case, the paper tray is selected based on thesettings in [Tray Priority]. If you specify [Not Selected] for a paper type, the tray loaded withthe paper type will be excluded from the targets of auto tray selection. The default is [1] forplain paper, [2] for recycled paper, and [Not Selected] for the others.Refer to• “Automatic Tray Selection” (P. 62)Tray PrioritySpecifies the priority of trays 1 to 4 for auto tray selection when the optional trays areinstalled. The bypass tray is excluded from the targets of auto tray selection.1 to 3Specify a priority of [1] to [3] for each tray. You cannot set the same tray to different prioritynumbers. That means the trays that can be set [2] are other than the tray specified in [1],and the trays that can be set [3] are other than the trays specified in [1] and [2]. Theremaining trays are set to [4]. The default priority is tray 1 (highest priority) to tray 4 (lowestpriority).
