4.2 Description of Menu Items 89Set TimeEnter the time in the format of “hh/mm” (e.g. 12/02).Date FormatSelect the date display order from “yyyy/mm/dd” (year/month/day), “mm/dd/yyyy” (month/day/year), and “dd/mm/yyyy” (day/month/year).Time FormatSelect the time display from 12-hour display and 24-hour display.Time ZoneSpecify the time zone if required.Daylight Saving, Start Date, End DateSpecify summer time if required.Drum/Toner LifeWhen it is about time to replace the drum/toner cartridge, a message will appear on thedisplay. After the message is displayed, you can continue to print normally for about 100sheets.Specify whether to stop printing when the drum/toner cartridge needs to be replaced.[Cancel Print] (default)Select this to stop printing after the message notifying that it is about time to replace thedrum/toner cartridge was displayed and until it is replaced with a new one.[Continue Print]Select this not to stop printing even when the drum/toner cartridge needs replacing. Notethat continuous printing after the replacement time has passed may affect the print imagequality and the printer performance. It is recommended to install a new drum/tonercartridge.mm/inchSpecifies the unit that is used on the control panel from [Millimeter (mm)] and [Inch (")].The default is [Millimeter (mm)].Printer Settings[Printer Settings] menu is used to make settings for paper trays such as the auto trayselection feature.Substiture TraySpecifies whether to print on paper loaded in another tray when there is no paper left in thetray selected by the auto tray selection feature. If you want to replace paper, specify thepaper size.[Off] (default)Select this not to replace paper but display a message prompting you to load paper.[Larger Size]Select this to replace the paper with a larger size paper before printing in 100%magnification ratio.[Nearest Size]Select this to replace the paper with the nearest size paper before printing. This may shrinkthe images automatically as required.
