2.8 Direct Printing of PDF File 47Printing a PDF File Without Using ContentsBridge UtilityHere, we send the PDF file to the printer for printing using lpr command directly and notContentsBridge Utility. Printing will be done with the following items configured according tothe control panel settings.Refer to• “PDF” (P. 71)Note• [Layout] will not be displayed when [PS] has been selected for [Process Mode].• When lpr command is used for printing, specify the number of copies by lpr command. The [Quantity]setting on the control panel will become disabled. Also, if the number of copies is not specified by lprcommand, it will be treated as one copy.When using lpr command to print PDF file, you have to use the control panel or CentreWareInternet Services to activate the LPD port on the printer.Refer to• “Network/Port” (P. 76)Target OSsWindows NT 4.0/Windows 2000/Windows XP/Windows Server 2003Printing PDF FileThe following specification on the computer is an example of using lpr command to printPDF file.Note• indicates space.Example: Printing a [event.pdf] file with a printer IP address of 192.168.1.100.• Process Mode • Password• Quantity • Collate• 2 Sided • Output Size• Print Mode • LayoutC:\>lpr -S 192.168.1.100 -P lp event.pdf key
