Directory Number Administration –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––86 DKAdmin/DKBackupto change the range of numbers used for all the ports, press F5. A pop-up box displays,enabling you to specify a range of numbers.© Type the desired range of Port Reference Numbers for the PDNs (000 ~ 079).© Type the desired range of Port Reference Numbers for the PhDNs (500 ~ 579).© Type a Voice Mail CF Prefix (up to four characters) and press Enter. A messagedisplays: All ports will be reset to default values. Goahead?Press Enter to set/change all Call Forward IDs.6. Highlight the Voice Mail Message Waiting ID Code field and enter an applicable messagewaiting ID code (up to 16 characters)...orto change the range of numbers used for all your ports, press F5. A pop-up box displays,enabling you to specify a range of numbers.© Type the desired Port Reference Number for the PDNs (000 ~ 079).© Type the desired Port Reference Number for the PhDNs (500-579).© Type a Voice Mail MW Prefix (up to four characters) and press Enter. A messagedisplays: All ports will be reset to default values. Goahead?Press Enter to set/change all Message Waiting IDs.7. Press F9 to save the entries and upload the data to the DK, or F10 to save the assignmentsand return to the Main Menu.ä To set or change detailed information for the PDNs/PhDNs1. From the Directory Number Administration screen, highlight the DN you wish to edit andpress F2. The Directory Number Administration screen for the selected DN numberdisplays.This screen (shownright) enables you toturn on or off animmediate ring, or a12- or 24-second delayring. You can alsoaccess your ringinglines and flexible keysfrom this screen.2. Highlight the Imm.Ring field for thedesired DN. Thespacebar toggles thefield between enabledand disabled. When the field is enabled a check mark is displayed in the field.3. Highlight the 12s Dly field for the desired DN. The spacebar toggles the field betweenenabled and disabled. When the field is enabled a check mark is displayed in the field anda 12-second delay before ringing occurs.
