Toshiba Strata DK Admin User Manual

Also see for Strata DK Backup: User guide User guide User guide User guide User guide

Contents

–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– Backup Data101Backup Menu (DKBackup)The DK System Program File screen displays listing the available data for backup (seescreen in Step 3). For security, this code does not display on screen as you type it. Thedefault code is 0000. This is the “1st level password” which is set in the Strata DKProgram 00 (see the record sheet for Program 00 in the Strata DK Programming Manual).Note If the Problem: Unable to Establish Communications screen displays, follow thetroubleshooting steps on the screen and/or see Appendix A – Connecting to Strata DKto correct the problem.3. Highlight the program file you wish to back up (download) and press the spacebar to tag(checkmark) the program file (shown below). Repeat this step for as many program filesas you wish to back up. Press F2 to tag all program files (see Note “The DK SystemProgram File...” on Page 102).4. After selecting the programs, press F3. The screen prompts with the message “Youwill receive data from the DK. Are you sure?”5. Highlight Yes and press Enter.6. DKAdmin/DKBackup prompts you to enter the DK Code again. When the correct code isentered, DKAdmin/DKBackup turns on LED10 in Program 77-1 and then downloads allfiles selected in Step 3. The screen displays Download Complete when finished.7. Press Esc twice and select the next desired function.Notesl When you back up PRGALL, the DK security code set in the DKAdmin/DKBackupcustomer database, is not sent to the processor. You must always enter the DK securitycode that is actually programmed on the processor installed in the Strata DK. You canchange the DK security code using the DKAdmin Program Administration Section optionor manually using the programming telephone.l Access to the DK Code should be considered highly confidential and only given to thoseindividuals with the security level which enables them to program or update DK data. Ifchanging the Strata DK Program 00 Passwords, always change both Level 1 and 2 forsecurity. DKAdmin/DKBackup checks both codes and runs with either code.DK System Program File4 Program No. Program TitlePRGALL All System ProgramsREPALL All Station and System Speed Dial NumbersNAMEALL All User NamesVIDALL All Voice Mail ID Codes (#656)MIDALL All Voice Mail Message Waiting Codes (#657)ADMEMOAL All Station and System Speed Dial MemosMSGALL All Station and System LCD MessagesCFALL Directory Number Call Forwarding settings (R3)MWALL Message Waiting Lamp settings (R3)CLID Caller ID/ANI Lost Call telephone numbers (R3)F1-Help SPACE-(Un)Tag F2-(Un)Tag All F3-Backup F4-Restore F5 -UpgradeEsc-ExitSelect If Marked