–––––––––––––––––––––––––––––––––––––––––––––––––– DK424 Release 4.0 Upgrade Programming Example159Upgrading Strata DK Systems to DK424 Release 4.0If the DID Intercept Destination is the Kitchen Telephone (PDN 107), data in this programmust not be changed to adjust for port shifting caused by the RDDU DID line PCB in slot 13.This is because Port 007 did not shift after the upgrade (see Figures 33 and 34):Program *17 data for DID lines 001~004 before the upgrade = 007Program *17 data for DID lines 001~004 after the upgrade = 007Program 20If the Front Office Telephone (PDN 112) is equipped with an RPCI-DI to display DNIS andCaller ID on a PC running a TAPI application, the data in Program 20 must shift. This enablesthe Front Office Telephone and RPCI to operate the same way after the upgrade as it didbefore. Notice that all Program 20 data for port 012 moves port to 008.Program 30If the Back Room Telephone (PDN 119) is programmed to dial forced and verified Accountcodes when making outside calls, the data in Program 30 must shift. This is to allow the BackRoom Telephone to operate the same way after the upgrade as it did before. Notice that allProgram 30 data for port 019 moves to port 015.Program 33If the Front Office telephone (DN 112) is programmed to hunt to the Back Room Telephone(PDN 119), the data in Program 33 must shift:If the Front Office telephone (PDN112) is programmed to hunt to the Lobby Telephone(PDN 100), the data in Program 33 must shift:Before the Upgrade After the UpgradePort 008 LED17 on, all others off (Program 20default)LED 01,02,10, 11, and 17 on, allothers offPort 012 LED 01,02,10, 11, and 17 on, allothers off LED17 on, all others offBefore the Upgrade After the UpgradePort 015 LED 01, 05, and 07 ON, all others off(Program 30 default)LED 01, 05, 07, 08, and 14 ON, allothers offPort 019 LED 01, 05, 07, 08, and14 on, allothers offLED 01, 05, and 07 on, all others off(Program 30 default)Before the Upgrade After the UpgradeHunt-From Port 012 to Port 019 Hunt-From Port 008 to Port 015Before the Upgrade After the UpgradeHunt-From Port 012 to Port 000 Hunt-From Port 008 to Port 000
