Maintain Customer File ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––38 DKAdmin/DKBackupAfter Connect Enter the After Connect String when calling into a Strata DK modem pool (seeFigure 20 on Page 135). It is recommended that you enter AT~~~ATDDYYY asthe After Connect string (where YYY is the extension number of the PDIU-DSconnected to the Strata DK TTY port).Notesl If you are not using the modem pool function, the DK security code can be seton the After Connect line in each Customer File setup so it will be sentautomatically to the Strata DK after connecting the DKAdmin/DKBackup PC tothe Strata DK remotely via modems. Setting the DK security code in the AfterConnect String is optional.l In some cases, when connecting to older Release 1 processors or during heavytraffic conditions, the After Connect string may be sent and not recognized bythe Strata DK. If this should occur, do not enter the DK security code in the AfterConnect string.DK Model, Release Press Enter and the DK Model, Release dialog box appears. Highlight theappropriate processor type and software release number and press Enter.Important!lFor proper operation, be sure you select the appropriate software release.lIf creating a new customer to upgrade a processor, select the current releaselevel (i.e., if upgrading from RCTUB2, select Release 2).lTo upgrade a Release 1 or Release 2 processor to Release 3 or Release 3.10,select Release 1 or 2; the upgrade process converts this line to Release 3.lTo upgrade Release 3 to Release 3.10 processors, select Release 3.Data Directory The customer directory automatically defaults to the assigned customer ID. Youmay change the directory as desired. This is the directory in which all customerdata is stored on the DKAdmin/DKBackup PC disk drive. DKAdmin/DKBackupautomatically adds the “.DK” extension on the end of the directory.Table 2 Customer File Maintenance Screen Fields(continued)Field DescriptionDK14, WMAU, R1DK16e, TMAU , R1DK40, TMAU, R1DK , RCTU-A, R1/R2DK , RCTU-A, R3.1DK , RCTU-A, R4DK , RCTU-B, R1/R2DK , RCTU-B, R3DK , RCTU-B, R4DK , RCTU-CD, R1/R2DK , RCTU-CD, R3DK , RCTU-CD, R4DK , RCTU-EF, R3DK , RCTU-EF, R4
