System/Station Administration –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––50 DKAdmin/DKBackup© Press the spacebar to toggle between available options, or enable (indicated by a checkmark)/disable (indicated by a blank) the attribute.© Enter a value.4. Press F10 to save the changed data to the customer database file.Note After saving the data, press F9 to update the Strata DK with the changes. TheDKAdmin PC must be connected to the Strata DK to upload changes to port attributes(see Appendix A – Connecting to Strata DK).Table 3 Attribute DefinitionsAttribute DescriptionTelephoneKeystrip TypeFour default telephone button arrangements are provided. Changing the keystrip typewrites/overwrites existing button assignments.Ring Tone Distinctive system ringing sends a different ring tone for CO (loop, DID, or ground) lineringing than that for intercom, tie ringing. In addition, CO line (loop or ground) ringing canbe different from one telephone to another.Volume Level This program sets the initial off-hook volume level for each digital telephone handset and/or headset.SpeakerphoneEnabledAny electronic or digital full speakerphone operation can be disabled by assignment withthis program. If disabled, a speakerphone will act as a handsfree electronic or digitaltelephone. Initialized data enables all speakerphones.MIC Key LockEnabledAn electronic or digital telephone microphone can be turned on or off by using the Micbutton. A button lock operation enables an alternate action Push On/Push Off of the Micbutton.MIC on at Startof CallThe microphone, as well as the MIC LED, can be selected to be on or off at the start of acall if the Push On/Push Off mode is chosen.Call PkupOn=AC, Off=AC, GP & STAIf ON, a station or group of stations (Pickup Group) can pick up a call that is ringinganother stations’s [PDN] or [PhDN], a call placed on hold at another station and othertypes of calls.Speed DialAllowedA station may be denied the use of Speed Dial (Station and System) with this program.ABR AccessEnabledThe ABR feature can be enabled or denied for each station. The system selects the lastline in the originating line group each time ABR is initiated.OCA/BusyOverrideAutomaticA busy digital or electronic telephone can receive a second voice communication onintercom via Handsfree Answerback if the OCA feature is installed. If a calling station doesnot have an automatic function, the user must dial an extra digit of 2 after hearing busytone in order to gain access to OCA.Forced AccountCodeIf this feature is selected, a station or Direct Inward System Access (DISA) CO line userusing a line with a Forced Account requirement must enter an Account Code before thecall can be completed.Change TROverride CodeIf selected for this feature, a station can change Toll Restriction (TR) override codes.Change DISASecurity CodeThis enables a selected station to change the DISA security code.SLTANTI-BounceSLT Hookflash Anti-Bounce Guard (LED 12 ON) in Program 30 prevents false recalls dueto hookflash bounce during SLT hang-up on outside calls.Account CodesVerifiedIf the system is set for Verified Account Codes in Program 69, station users must enterspecific codes when entering Forced or Voluntary Account Codes.