Sony DNW-A75 Maintenance Manual

Also see for 10001: Installation manual Installation manual Operation manual Maintenance manual Maintenance manual

4-7DNW-A75/A75PC0: SERVO/DT CHECKThis submode is used to check the servo and analog DT systems.C00-03: SERVO CHECKThis mode is used to check the servo system. For more details, refer to Section 4-2-2 (on page 4-14).Title Page DescriptionC00 : INPUT CHECK — Check menu of sensors (not including a part of sensors)C000 : CASSETTE SW 4-15 Checks the cassette tab and REC inhibit sensors.C001 : CASSETTE COMP. SW 4-16 Checks the cassette-in and cassette size sensors.C002 : TOP/END SENSOR 4-17 Checks the tape top and tape end sensors.C003 : DEW SENSOR 4-18 Checks the dew condensation sensors.C01 : MOTOR CHECK — Check menu of motors (except a fan motor) and partial sensorsC010 : S REEL MOTOR 4-19 Checks the S reel motor.C011 : T REEL MOTOR 4-19 Checks the T reel motor.C012 : THREADING MOTOR 4-20 Checks the threading motor and threading/unthreading end sensors.C013 : CASSETTE COMP. MOTOR 4-21 Checks the cassette compartment motor and cassette-down sensors.C014 : CAPSTAN MOTOR 4-22 Automatically checks the capstan motor.C015 : DRUM MOTOR 4-23 Automatically checks the drum motor.C016 : REEL POSITION MOTOR 4-24 Checks the reel shift motor and reel position sensors.C02 : PLUNGER SOL. CHECK — Check menu of solenoidsC020 : PINCH ROLLER 4-25 Checks the pinch roller solenoid.C021 : S REEL BRAKE 4-26 Checks the S reel brake solenoid.C022 : T REEL BRAKE 4-26 Checks the T reel brake solenoid.C023 : CLEANING ROLLER 4-27 Checks the cleaning roller solenoid.C03 : REEL/CAPSTAN MOTOR & 4-28 Continuous check menu of reel and capstan motorsFG CHECKC04: ANALOG DT CHECKThis mode is used to check the analog DT system. For more details, refer to Section 4-2-3 (on page 4-29).Title Page DescriptionC060 : SG LOOP CHECK 4-29 Checks the feedback loop of the strain gauge for analog Betacam playback.4-2. TAPE Maintenance Mode (M0)4-2-1. OverviewsSERVO/DT CHECKC00-03:SERVO CHECKC04:ANALOG DT CHECK*SERVO CHECKC00:INPUT CHECKC01:MOTOR CHECKC02:PLUNGER SOL. CHECKC03:REEL/CAPSTAN MOTOR& FG CHECK*[SET][MENU]SERVO/DT CHECKC00-03:SERVO CHECKC04:ANALOG DT CHECK*ANALOG DT CHECKC60:SG LOOP CHECK*[SET][MENU]