Sony DNW-A75 Maintenance Manual

Also see for 10001: Installation manual Installation manual Operation manual Maintenance manual Maintenance manual

4-10 DNW-A75/A75PSERVO/DT ADJUSTA00-01:SERVO ADJUSTA02:ANALOG DT ADJUST*ANALOG DT ADJUSTA030:HEAD OFFSET LEVELA031:DRIVE GAINA032:DATA SAVE*[SET][MENU]A0: SERVO/DT ADJUSTThis submode is used to adjust the servo and analog DT system.A00-01: SERVO ADJUSTThis mode is used to adjust the servo system. For more details, refer to Section 4-2-7 (on page 4-46).Title Page DescriptionA000 : A001-A008 ADJ. 4-47 Continuously executes the automatic adjustment menus (A001 toA008).A001 : S REEL FG DUTY 4-48 Automatically adjusts the duty ratio of an S reel FG.A002 : T REEL FG DUTY 4-48 Automatically adjusts the duty ratio of a T reel FG.A003 : CAPSTAN FG DUTY 4-48 Automatically adjusts the duty ratio of a capstan FG.A004 : S REEL OFFSET/FRIC 4-48 Automatically adjusts the S reel offset and friction.A005 : T REEL OFFSET/FRIC 4-48 Automatically adjusts the T reel offset and friction.A006 : S REEL TORQUE 4-48 Automatically adjusts the S reel torque.A007 : T REEL TORQUE 4-48 Automatically adjusts the T reel torque.A008 : S/T TENSION OFFSET 4-48 Automatically adjusts the tension regulator offset values on the S and Tsides.A010 : CAPSTAN FREE SPEED 4-49 Automatically adjusts the capstan free speed.A011 : RF SWITCHING POS. 4-50 Automatically adjusts the RF switching position.A012 : NV-RAM CONTROL 4-52 Saves the adjustment data in a servo system.A02: ANALOG DT ADJUSTThis mode is used to adjust the analog DT system. For more details, refer to Section 4-2-8 (on page 4-53).Title Page DescriptionA030 : HEAD OFFSET LEVEL 4-53 Adjusts the offset level of an analog Betacam PB head.A031 : DRIVE GAIN 4-55 Adjusts the drive gain of an analog DT system.A032 : DATA SAVE 4-57 Saves the adjustment data in an analog DT system.4-2. TAPE Maintenance Mode (M0)4-2-1. OverviewsSERVO/DT ADJUSTA00-01:SERVO ADJUSTA02:ANALOG DT ADJUST*PREVIOUSSERVO ADJUST (CONTINUED)PREVIOUSA010:CAPSTAN FREE SPEEDA011:RF SWITCHING POS.A012:NV-RAM CONTROL*SERVO ADJUSTA000:A001-A008 ADJ.A001:S REEL FG DUTYA002:T REEL FG DUTYA003:CAPSTAN FG DUTYA004:S REEL OFFSET/FRICA005:T REEL OFFSET/FRICA006:S REEL TORQUEA007:T REEL TORQUEA008:S/T TENSION OFFSETCONTINUE* CONTINUE[SET][MENU]