Sony DNW-A75 Maintenance Manual

Also see for 10001: Installation manual Installation manual Operation manual Maintenance manual Maintenance manual

1-10 DNW-A75/A75P1-8. Signal Inputs and Outputs1-8. Signal Inputs and Outputs< Reduced drawing of rear panel >Remote connectors8 REMOTE PARALLEL I/O (50P) * D-SUB 50P connector (Refer to Optional “Interface manual” for details.)9 VIDEO CONTROL D-SUB 15P connectorfor a TBC remote controller (BVR-50) connection9 RS-232C D-SUB 9P connector (RS-232C interface)for ISR (Interactive Status Reporting)9 REMOTE1-OUT (9P) D-SUB 9P connector (RS-422A interface)Remote control9 REMOTE1-IN (9P) D-SUB 9P connector (RS-422A interface)Remote control9 CONTROL PANEL D-SUB (mini) 29P connectorfor an outside control panel connectionInput connectors1 VIDEO INPUT, REF.VIDEO BNC x 2 in loop through connectionOutside reference video signal (Black burst or composite sync)0.3 V p-p, 75 Z, sync negative1 VIDEO INPUT, COMPOSITE BNC x 2 in loop through connectionAnalog composite video 1.0 V p-p, 75 Z, sync negative1 VIDEO INPUT, COMPONENT BNC x 3 (1 set: Y, R-Y, and B-Y)Analog component videoY : 1.0 V p-p, 75 Z, sync negativeR-Y/B-Y : 0.7 V p-p, 75 Z3 SDI BNC x 1 (active through out x 1)Serial digital interface (270 Mbit/s), complies with SMPTE 259M & ITU-R BT.6564 AUDIO INPUT XLR 3-pin x 4 (1 set: CH1, CH2, CH3, and CH4)Analog audio 4 channelsLOW OFF : _60 dBu, high impedance, balancedHIGH OFF : +4 dBu (Standard), high impedance, balancedHIGH ON : +4 dBm (Standard), 600 Z termination, balanced5 TIME CODE IN XLR 3-pin x 1Time code 0.5 to 18 V p-p, 10 kZ, balanced7 AUDIO INPUT (AES/EBU) BNC x 2 (1 set: CH1/2 and CH3/4)Digital audio 4 channelsAES/EBU format, complies with AES-3id-199514579862 3 !/