Scanning_ 865. Press Programs > Save.6. Press Program Name input area. The pop-up keyboard appears.Enter the program name you want. Then press OK.You can see the values of set Programs by scrolling up or downand check the values using the up/down arrows.7. Press Save.8. You can check the settings again. If everything is fine, press Add tohome to make a shortcut on the main screen, Save to save currentsettings, or Cancel to quit without saving.Loading1. Press Scan to Email, Scan to Server or Scan to USB from the displayscreen.2. Press Programs > Load.3. Press a previous setting you want to use.The machine is now set to scan according to the selected setting.4. Press Add to home to make shortcut in main screen, Delete to deletethe current setting or Apply to use the selected setting.Scanning originals and sending to yourcomputer (scan to PC)This option allows you to scan an image on the machine and send it out toyour network-connected computer.For a network connected machineMake sure the scanner driver is installed on your computer.1. Make sure that your machine and the computer are connected to anetwork.2. Place the originals face up in the DADF or place a single original facedown on the scanner glass and close the DADF (see "Loading originals"on page 38).3. Press Scan to PC from the display screen.4. Select your computer name and press OK. If the machine requests apassword, enter the password using the numeric keypad on the controlpanel.5. Press the application program you want and press Select.Default setting is My Documents.6. Set the scan quality with Duplex and Resolution in the Basic tab.7. Set the size of original in the Advanced tab. If you are not sure of theoriginal size, select Auto.8. Set the color mode in the Image tab.9. Set the file format in which the image is to be saved in the Output tab.File Format activates only when you select the applicationprogram as My Documents.10. Press Start from the control panel to begin scanning.• Scanned image is saved in the computer’s My Documents >My Pictures > Samsung folder.Scanning with TWAIN-enabled softwareIf you want to scan documents using other software, you will need to useTWAIN-compliant software, such as Adobe Photoshop.Follow the steps below to scan with TWAIN-compliant software:1. Make sure that the machine is connected to your computer and poweredon.2. Place the originals face up in the DADF or place a single original facedown on the scanner glass and close the DADF (see "Loading originals"on page 38).3. Open an application, such as Adobe Photoshop.4. Open the TWAIN window and set the scan options.5. Scan and save your scanned images.MAC scanningYou can scan documents using Image Capture program. MAC OS X offersImage Capture program.Scanning with network1. Make sure that the machine is connected to your computer and poweredon.2. Place the originals face up in the DADF or place a single original facedown on the scanner glass and close the DADF (see "Loading originals"on page 38).3. Start Applications and click Image Capture.
