Samsung SCX-812x Series User Manual

Also see for CLX-9201 Series: User guide Service manual Service manual

Contents

Printing_ 112permission can start a print job.• Group permission: If you check this option, only groups with grouppermission can start a print job.• If you want to encrypt a job accounting password, refer to help( ) in the bottom left corner of the printer properties pane.• Administrators can enable job accounting and configurepermissions in the control panel or SyncThru™ Web Service.For the detailed information about them, refer to theAdministrator’s Guide.Job SettingThis option allows you to choose how to print the file by using the harddisk drive in your machine.This option allows you to choose how to printor save the file by using the HDD in your machine.• Print Mode: The default Print Mode is Normal.- Normal: This mode prints without storing your document.- Confidential: This mode is used for printing confidentialdocuments. You need to enter a password to print it.- Store: This mode is used only for storing documents on theHDD. If necessary, you can load and print the stored documents.You can find the stored file in the Stored Document (see"Saving documents in the Stored Document" on page 93).- Store and Print: This mode is used when printing and storingdocuments at the same time. If necessary, you can load and printthe stored documents. You can find the stored file in the StoredDocument (see "Saving documents in the Stored Document" onpage 93).- Print Schedule: Use this option to enter a specific time to printthe job. This is useful for printing large amount of data or if youwant all your job to print at the same time. Select the date andtime you want to print. User ID and Job Name are used whenyou need to find a stored document using the control panel.• Print At: Select the date and time you want to print.• User ID: This option is used when you need to find a storedfile using the control panel. The user name automaticallyappears as the user name that you use to log into Mac OS X.• Job Name: This option is used when you need to find a storedfile using the control panel.Printer Features• Finishing: You can select the print output options such as staple,offset and etc. This option is available only when the optional InnerFinisher or booklet finisher is installed.• Booklet Printing: This feature prints your document on both sidesof a paper and arranges the pages so that the paper can be folded inhalf after printing to produce a booklet. Some options in BookletPrinting are available only when the optional stanard finisher orbooklet finisher is installed.• Front Cover: Prints the document with a front cover. The frontcover can be a blank paper or the first page in the document.• Back Cover: Prints the document with a back cover. The backcover can be a blank paper or the last page in the document.• Front and Back Cover: Prints the document with a front cover anda back cover. The covers can be blank papers or the first and the lastpages in the document.• Paper Type: This option allows you to correspond to the paperloaded in the tray from which you want to print. This will let you getthe best quality printout. If you load a different type of print material,select the corresponding paper type.• Edge Enhancement: This option allows you to emphasize edges oftexts and fine lines for improving readability.• RGB Color Simulator: This setting determines how colors arerendered. Standard is the most widely used setting which the colortone of this mode is the closest to that of standard monitor (sRGBMonitor). Vivid mode is appropriate for printing presentation dataand charts. The color tone of Vivid mode produces more Vivid colorimages than that of Standard mode. Device mode is best used forprinting fine lines, small characters and color drawings. The colortone of Device mode may be different from that of monitor, the puretoner colors are used for printing cyan, magenta and yellow colors.Corporate Imaging is most common color setting used in thecorporate environment.