Scanning_ 79address book using SyncThru™ Web Service" on page 96).• Recent: Shows the latest 10 email addresses used. Also, you canchoose email addresses instead of pressing the pop-up keyboard(see "Resending to the last email address" on page 78).• Resolution: Selects scanning resolution value (see "Changing theresolution" on page 81).• Programs: Allows you to save the current settings for future use(see "Using a programs setting" on page 85).• Darkness: Adjusts the degree of darkness of scanned output (see"Changing Darkness" on page 81).Advanced tab• Original Size: Selects the size of originals (see "Selecting the sizeof originals" on page 83).• Original Orientation: Selects the orientation of the originals (see"Selecting the orientation of originals" on page 82).• Duplex: Sets the machine to print copies on both sides of the paper.Image tabYou can move to the next or previous page using the up/down arrowslocated at the bottom left.• Original Type: Selects whether the original is text, photo, etc. (see"Selecting the type of originals" on page 83).• Color Mode: Adjusts the color options of scanned output (see"Selecting the color mode" on page 83).• Adjust Background: Erase the background to some extent byadjusting density or brightness (see "Adjusting background" onpage 83).• Erase Backside: Prevents scanning the other side’s image shownthrough the original paper (see "Erasing backside Images" onpage 84).Output tab• Quality: Adjusts the display quality of the scanned output (see"Quality" on page 84).• File Format: Selects the file format of the scanned output (see "FileFormat" on page 84).Scanning and sending to an SMB/FTP serverYou can select up to three destinations using SMB, or FTP servers.1. Place the originals face up in the DADF or place a single original facedown on the scanner glass and close the DADF (see "Loading originals"on page 38).2. Press Scan to Server from the display screen3. Set the scan features in the Advanced, Image, or Output tabs (see"Changing the scan feature settings" on page 81).4. Press the Basic tab.5. Press the server name input area, you can enter a recipient’s serveraddress manually. You cannot enter an address in the second fieldbefore entering an address in the first field.You can also use Address Book to enter the addresses easily (see"Setting up an address book" on page 94).6. Set the scan quality by Duplex and Resolution (see "Scanning fromboth sides of originals" on page 82 and "Changing the resolution" onpage 81).7. Press Start on the control panel.The machine begins scanning and then sends the scanned image to thespecified server.If an original is placed on the scanner glass, the machine shows thewindow asking if you want to place another page. Load another originaland press Yes. When you finish, press No on this window.• To cancel the current scan job, press Stop on the control panel. Oryou can delete current and pending jobs using Job Status on thecontrol panel. Select the job you want to cancel and press Delete(see "Job Status button" on page 36).• While the machine is sending a scanned data, you cannot use themachine to copy or to send a fax.Resending to the last server addressTo resend a file to the server address last sent to:1. Place the originals face up in the DADF or place a single original facedown on the scanner glass and close the DADF (see "Loading originals"on page 38).2. Press Scan to Server from the display screen.
