Printing_ 1075. Select the page order from the Page Order drop-down list, if necessary.6. Click the Paper tab, select the Original size, Source, and Type.7. Click OK or Print until you exit the Print window.Printing postersThis feature allows you to print a single-page document onto 4, 9, or 16sheets of paper, for the purpose of pasting the sheets together to form oneposter-size document.1. To change the print settings from your software application, accessPrinting Preferences (see "Opening printing preferences" onpage 101).2. Click the Basic tab, select Poster Printing in the Type drop-down list.3. Select the page layout you want.Specification of the page layout:4. Select the Poster Overlap value. Specify Poster Overlap in millimetersor inches by selecting the radio button on the upper right of Basic tab tomake it easier to paste the sheets together.5. Click the Paper tab, select the Original size, Source, and Type.6. Click OK or Print until you exit the Print window.7. You can complete the poster by pasting the sheets together.Printing on both sides of the paperYou can print on both sides of a paper; duplex. Before printing, decide howyou want your document oriented. You can only use this feature with Letter-,Legal-, Oficio-, US Folio-, A4-, ISO B5-, JIS B5-, Statement-, Executive-,A5-, 8K-, 16K-, Ledger- or JIS B4-sized paper.Do not print on both sides of the special media, such as labels,envelopes, or thick paper. It may cause a paper jam or damage themachine.1. To change the print settings from your software application, accessPrinting Preferences (see "Opening printing preferences" onpage 101).2. Click the Basic tab.3. From the Double-Sided Printing section, select the binding option youwant.• Printer Default: If you select this option, this feature is determinedby the setting you’ve made on the control panel of the machine. Thisoption is available only when you use the PCL printer driver.• None: Disables this feature.• Long Edge: This option is the conventional layout used inbookbinding.• Short Edge: This option is the conventional layout used incalendars.• Reverse Double-Sided Printing: Check this option to reverse theprint order when duplex printing.4. Click the Paper tab, select the Original size, Source, and Type.5. Click OK or Print until you exit the Print window.Change the size of your documentYou can change the size of a document to appear larger or smaller on theprinted page by typing in a percentage for reduction or enlargement.1. To change the print settings from your software application, accessPrinting Preferences (see "Opening printing preferences" onpage 101).2. Click the Paper tab.3. Select the actual paper size of the originals from the Original Size.4. Enter the scaling rate in the Percentage input box.You can also click the up/down arrows to select the scaling rate.You cannot use this feature when you select a size of paper fromthe Output Size.5. Select the Source and Type.6. Click OK or Print until you exit the Print window.Fitting your document to a selected paper sizeThis printer feature allows you to scale your print job to any selected papersize regardless of the document size. This option can be useful when youwant to check fine details on a small document.
