Panasonic PN28080K-ID Operation Manual

Also see for PN28480K-ID: Operation manual Operation manual Installation guide

Contents

Panasonic PN28080K-ID Operation Manual Manual pdf 67 page image

673.2.15. Loop Detection ConfigSelect "Advanced Config" and "Loop Detection" and then "Loop Detection Config"to open the screen shown in Figure 3-40. On this screen, you can configure theLoop detection and blocking function settings.Figure 3-40 Loop Detection ConfigScreen DescriptionGlobal Loop Detec-tion StatusDisplays the status of the Loop detection and blocking function.Enable Enables the Loop detection and blocking function.Disable Disables the Loop detection and blocking function.Target Port Select-ingSelect multiple target ports for configuring settings at a time.Click the "Select All" button, and all ports will be selected.Click the "Reset" button, and all ports will be deselected.Click the "Set selected port (s) " button after selecting and changing the itemsfor configuring settings at a time, and the same settings will apply to theselected ports.Port Number Displays the port number.Link Displays the link status.Up The link has been established successfully.Down The link has not been established.Status Displays the status of the Loop detection and blocking function for that port.Forwarding Sending packets normally.Loop Detect Detecting a loop and blocking a port.