553.2.7. Storm Control ConfigSelect "Advanced Config" and "Storm Control Config" to open the screen shown inFigure 3-32. On this screen, you can configure the storm control settings.Figure 3-32 Storm Control ConfigScreen DescriptionTarget Port Select-ingSelect multiple target ports for configuring settings at a time.Click the "Select All" button, and all ports will be selected.Click the "Reset" button, and all ports will be deselected.Click the "Set selected port(s)" button after selecting and changing the items forconfiguring settings at a time, and the same settings will apply to the selectedports.Port Number Displays the port number.UnknownUnicastEnables or disables the Unknown unicast storm control.Enable The Unknown unicast storm control is enabled.Disable The Unknown unicast storm control is disabled.(Factory default setting)Broadcast Enables or disables the broadcast storm control.Enable The broadcast storm control is enabled.Disable The broadcast storm control is disabled.(Factory default setting)Multicast Enables or disables the multicast storm control.Enable The multicast storm control is enabled.Disable The multicast storm control is disabled.(Factory default setting)
