Panasonic PN28080K-ID Operation Manual

Also see for PN28480K-ID: Operation manual Operation manual Installation guide

Contents

Panasonic PN28080K-ID Operation Manual Manual pdf 38 page image

383.1.15. Telnet Access LimitSelect "Basic Config" and "System Security" and then "Telnet Access Limit" to openthe screen shown in Figure 3-15. On this screen, you can configure limitation ofequipment accessing this switch via Telnet.Figure 3-15 Telnet Access LimitScreen DescriptionTelnet AccessLimitationDisplays the IPv4 Telnet access limit."Disable" is the factory default setting.Enable Enables the Telnet access limitation.Disable Disables the Telnet access limitation.IPv6Telnet AccessLimitationDisplays the IPv6 Telnet access limit."Disable" is the factory default setting.Enable Enables the Telnet access limitation.Disable Disables the Telnet access limitation.Number This is the entry number for the Telnet access limit.IP Address/Subnet MaskDisplays the information on accessible IPv4 networks to be added.There is no factory default setting. "0" is displayed for all of IPv4 Addresses andSubnet Masks.IPv6 Address/Prefix LengthDisplays the information on accessible IPv6 networks to be added.There is no factory default setting. "::" is displayed for all of IPv6 Addresses andSubnet Masks.