Panasonic PN28080K-ID Operation Manual

Also see for PN28480K-ID: Operation manual Operation manual Installation guide

Contents

Panasonic PN28080K-ID Operation Manual Manual pdf 36 page image

363.1.13. Syslog Transmission ConfigrationSelect "Basic Config" and "System Security" and then "Syslog Transmission Confi-gration" to open the screen shown in Figure 3-13. On this screen, you can config-ure the settings of the Syslog server to which a system log is sent.Figure 3-13 Syslog Transmission ConfigrationScreen DescriptionGlobal SyslogTransmissionStatusDisplays the settings for sending system logs to the Syslog server."Disable" is the factory default setting.Enable Sends system logs to the Syslog server.Disable Does not send system logs to the Syslog server.Index This is the entry number for the Syslog transmission configuration.Status Displays the status of each entry."Disable" is the factory default setting.Enable Setting of the entry is enabled.Disable Setting of the entry is disabled.Syslog Server IP Displays the IP address of the Syslog server.Facility Displays the Facility value.Included data Displays information to be added.SysName Adds the SysName of this switch to the system log to be trans-mitted.IP address Adds the IP address of this switch to the system log to be trans-mitted.