Panasonic PN28080K-ID Operation Manual

Also see for PN28480K-ID: Operation manual Operation manual Installation guide

Contents

Panasonic PN28080K-ID Operation Manual Manual pdf 50 page image

503.2.3. VLAN Port ConfigSelect "Advanced Config" and "VLAN" and then "VLAN Port Config" to open thescreen shown in Figure 3-27. On this screen, you can configure the specified VLANport settings.Figure 3-27 VLAN Port ConfigScreen DescriptionTarget PortSelectingSelect multiple target ports for configuring settings at a time.Click the "Select All" button, and all ports will be selected.Click the "Reset" button, and all ports will be deselected.Click the "Set selected port (s) " button after selecting and changing the items forconfiguring settings at a time, and the same settings will apply to the selectedports.Port Number Displays the port number.PVID Displays the port's current PVID (Port VLAN ID) . The PVID displays the VLAN IDto which an untagged frame should be transferred when it was received. The fac-tory default setting is 1. If a tagged frame is received, the tag is referencedregardless of this value to determine the destination port.Receiving Frame Displays the type of frames to be received. For all ports, "Admit All" is the factorydefault setting.Admit All All frames are received.Tagged Only Only tagged frames are received.